1. Open the project
1. Go to the menu bar, navigate to "Projects" and open "All" the overview of all projects.
2. Open the desired project.
2. Work Preparation
3. Go to the "Work Preparation" tab.
4. Press "Laying Plan" to open the laying plan.
3. Go to the inverter step
5. Here you see the roof plane and the drawn arrangement.
6. Press this button to go to the inverter step.
7. Press "Add Inverter Group" to add a new inverter.
4. Select the desired inverter
8. Select the desired inverter here.
9. Here you can see the data that apply to the string inverter. How many solar panels are in the string, the total power (kW) and the Total Oversize.
5. Drawing the string
10. Select the inverter to draw with this. In the example the bottom inverter is selected.
11. With this function you can automatically draw a string plan.
12. When you have selected the inverter, you can start drawing manually. You do this by holding down the left mouse button, then move over the desired solar panels. To remove panels from the string you can do the same way while holding down the right mouse button.
6. Update the laying plan with the string plan
13. You have now created the string plan. You can now see the ballast plan appear here as well.
14. Press "Update" to save the laying plan with the ballast and string plan.
